2.2kw automatic tool change spindle upgrade
1: Power line: three-color line connects U, V and W phase/yellow line and green line grounding temperature control line 110°C thermistor two-phase connection to temperature control protector
2: Cooling water feed: pump lift 8m
3: Pole change and dust removal pressure: 0.2-0,3Mpa (6/4 hose)
4: Number of proximity switches: pole hanging and pole discharge NPN (normally open)
Proximity switch wiring method: brown wire connect + 24VDC, blue wire connect 0VDC
The signal load end is connected to +24VDC / the other end is connected to the black wire
5: Air sealing pressure: 0.1-0.2Mpa (4/2 hose)
6: Produce cooling water: (2 and 6 ends with 8/6 hoses)
7: Cylinder intake pressure: 0.65Mpa (6/4 hoses)
Model: GDL80-20-24Z / 2.2
Speed: 24000rpm
Material: outer jacket stainless steel, copper coil
Frequency: 800Hz
Power: 2.2Kw
Torque: 0.72 Nm
Shaft end connection: S020 bracket
Diameter: 80 mm
Cone hole runout: 2um
Voltage: 220V
Cooling method: water cooling
Lubrication method: Grease
Bearing number: 2 * HY6005C / P4, 1 * SM6004C / P4
Number of poles: 4P
Number of phases: 3
Rotation direction: counterclockwise rotation from the shaft extension
Tool bracket: IS020 (Imitation crystal is recommended)
Blind rivets: IS020-15° (Imitation crystal is recommended)
Weight: 8 kg
Equipped with standard ISO20 Taper Hole
The spindle adopts 4 imported high-precision P4 grade bearings, which effectively guarantees the spindle’s operation and processing accuracy
Double-layer seal and gas seal structure
Greatly improve the dustproof and waterproof performance, widely used in metal and copper engraving and cutting, as well as CNC carving
Special warning:
The electric spindle should be installed in the clamping position; otherwise, the bearing is easily damaged!
Before changing the tool, the spindle should stop completely. The manual tool replacement button does not work during the shaft rotation; otherwise, it is easy to cause the shaft to seize!
The compressed air should be clean and dry, and the filtering accuracy should be 0.1 micron! The air seal is usually open. It is recommended to use a secondary filter with a filtration accuracy of 0.5 micron/0.1 micron. The air filter is equipped with a self-draining device.
Company information and contact information
Jinan Hongyang CNC Machinery Co., Ltd. was established in 2008. There are more than 100 employees, and the inventory area is 10,000 square meters. It is mainly engaged in engraving machine parts, including spindle motor, frequency converter, stepper motor, drive, hybrid servo motor, servo motor, Richauto dsp series controller, weihong or nc studio controller, spindle cooling water pump, lubricating oil pump, tool sensor, Limit sensors, water-cooled vacuum pumps, air-cooled vacuum pumps, power supplies, transformers, gear boxes, racks, rails, sliders or blocks, ISO30 tool clips, cable chains, spindle dust covers, vacuum cleaners and other engraving machine accessories, welcome your For inquiries.
Contact information
WeChat whatsapp mobile 8615650000988
lily @ hycncrouter. com
Reviews
There are no reviews yet.