Function Summary:
1, the new patent products, compressed air drive, safe and fast and efficient.
2, the mean pressure and volume (5-8 kg/cm2), large torque output.
3, can seal all kinds of steel, iron, copper, aluminum, plastic materials such as tapping.It is not easy to broken wires.
4, canister with overload protection device, silk attack damage is less, the teeth of high precision.
5, the operation is simple: hand motor, alignment hole, hold down the start button and start tapping, tapping into the desired depth, hold down the exit button, tap head automatically quit, complete a tapping operations.
7, the heavier work content does not require positioning device or mobile, suit with universal head can be easily done.
8, quick positioning rapid and high cutting speed, increase the production.
9, through hole or blind hole, silk attack are not peculiar to fracture, pneumatic tapping machine safety torsion clamp cylinder to tap when encountered in the tapping blind holes,
automatic sliding, protect the tap head, high-precision tap to ensure the high precision tapping.
10. Repeat positioning rapid, can be continuous tapping operations on a workpiece, removes old tapping machine every tapping, readjust the workpiece position for the inconvenience,
greatly improve production efficiency;Wider range of work activities, universal head, can guarantee against any spiral Angle.
precautions:
1. For your use of the safety, please read operation manual, and used in accordance with the safety instructions to operate this machine, in order to avoid accidental damage caused by misuse.
2. When used properly, please placed in the location of the smooth, don’t placed in high places, to prevent degradation affect the function of the parts.
3. Rubber base is placed on the corrosive chemicals, so as not to affect the machine of the firm.
4. Do a good job every clean, in order to maintain the life of mechanical, especially two grinding hole is the most important, if not clean, indeed, can make the parts wear and tear, and affect the grinding accuracy.
5. The machine normal use within the scope of the motor warranty for one year, except the waste parts and grinding wheel.
A, adjusting the vertical:
1, let the pneumatic motor at the bottom of the quick change connectors and working desktop or workpiece plane contact, quick change connectors and work desktop,
vertical (quick change connectors with work desktop without clearance), then lock vertical plate or universal head of four retaining screw.
2, the air pipe joint in the joint between the motor.
Second, the pneumatic motor operation
1, press down the front-end pneumatic motor, motor is turned “trigger” of the;The tapping at the same time, the back-end “reverse button” of the pneumatic motor reversal;To exit.
2, parallel arm can easily move to tapping position, do not force a downward, tap it, like guide screw in and out of the screw hole with very little resistance.
Three, air requirements:
1, the intake pipe must be 3/8 inch or more than 10 mm, length should not be more than 10 m.
2, set the pressure in the 4-8 kg.
3, adjust air sanlian pieces of drip speed for 3-5 drops per minute, if drip fast motor upper will only get wet from the exhaust oil too much.
4, check the oil in the oil cup daily, oily and drip speed.
5, please use pneumatic tools for oil (viscosity 30 or so);Recommendation: sewing machine lubricating oil, light oil.
“Daily maintenance”
1. Often give air compressor drainage.Air compressor machine often drainage, if air compressor water too much and not drained in time, will bring to pneumatic motor, time is long, the bearing is not flexible.
Attachments:
Rack 1set
Pneumatic motor 1pc
Gas source processor 1set
Torsion chuck 6pcs
Torque adjustment wrench 1pc
Air pipe 1pc
Other Modle for optional:
NOTE:this link is for product model WT-D-12G.
Reviews
There are no reviews yet.