TM-600 VDSL tester specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on.
TM-600 VDSL Tester also introduces the Optical Power Meter and Visual Fault Locator function into the unit, as well as the TDR function;
It is one multifunction tester with smart size, true color LCD and powerful management software as well as the 6600mah rechargeable battery etc
2. Key Features
Ø Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2
Ø Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
Ø Supports Modem emulation and simulating login to Internet
Ø Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
Ø Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)
Ø Connects to CO via alligator clip or RJ11
Ø Rechargeable Li-ion Battery
Ø Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL)
Ø Data memory fuction
Ø LCD display, Menu operation
Ø Auto shut off if no any operation on keyboard
Ø Compliant with all known DSLAMs
Ø Software management
Ø Simple, portable and money-saved
3. Functions
Ø DSL Physical layer test
Ø Modem Emulation (Replace the user Modem completely)
Ø PPPoE Dialing (RFC1683,RFC2684,RFC2516)
Ø PPPoA Dialing (RFC2364)
Ø Telephone Function
Ø DMM Test
Ø Ping Function (WAN & LAN)
Ø Data upload to computer and software management
Ø Setup system parameter: backlight time, shut off automatically time without operation, press tone,
Ø Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on.
Ø Check dangerous voltage
Ø Optical Power Meter (Optional)
Ø Visual Fault Locator (Optional)
Ø Tone Tracker (included)
Ø TDR Cable Fault Locator (Optional)
Notice:this version included TDR function,but else optional function not included,if you need,please contact with us
4. Specifications
ADSL2+ |
|
Standards |
ITU G.992.1(G.dmt), ITU G.992.2(G.lite), ITU G.994.1(G.hs), ANSI T1.413 issue #2, ITU G.992.5(ADSL2+)Annex L |
Up channel rate |
0~1.2Mbps |
Down channel rate |
0~24Mbps |
Up/Down attenuation |
0~63.5dB |
Up/Down noise margin |
0~32dB |
Output power |
Available |
Error test |
CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode |
Available |
Display channel bit map |
Available |
ADSL |
|
Standards |
ITU G.992.1 (G.dmt) ITU G.992.2(G.lite) ITU G.994.1(G.hs) ANSI T1.413 Issue # 2 |
Up channel rate |
0~1Mbps |
Down channel rate |
0~8Mbps |
Up/Down attenuation |
0~63.5dB |
Up/Down noise margin |
0~32dB |
Output power |
Available |
Error test |
CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode |
Available |
Display channel bit map |
Available |
VDSL2 |
|
Be compatible with ADSL2+, ADSL standard. |
|
DSL line attenuation |
|
DSL line noise margin |
|
DSL line up/down channel speed (Inter/Fast mode) |
|
DSL line up/down maximum rate |
|
DMT sub channel bit number: 0~15, and each sub channel frequency points |
|
DSL line error number (CRC, HEC, FEC, LCD, OCD) |
|
DSL line local output power |
|
DSLAM information |
|
Error Code Second |
|
Impulse Noise Protection (INP) |
|
Support 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a |
|
DMM Test |
|
DC voltage (V): |
0~400 |
AC voltage (V): |
0~400 |
Loop resistance(Ω): |
0~20000 |
Capacitance (nF): |
0~1000 |
Insulation resistance (MΩ): |
0~50 |
Optical Power Meter ( Optional) |
|
Measurement range: |
-70~+10dBm or -50~+26dBm |
Wavelength |
850nm,1300nm,1310nm,1490nm,1550nm,1625nm |
Visual Fault Locator (Optional) |
|
Output Power |
10mw |
Wavelength |
650nm ± 20nm |
Tone Tracker (Optional) |
|
Output Power |
10mw |
Wavelength |
650nm ± 20nm |
Test Range |
|
Dead Zone |
|
Resolution Rate |
1m |
General Specification |
|
LCD |
800×480 TFT |
Power supply |
Internal Rechargeable 6600mAH Li-ion battery |
Battery Duration |
4 to 5 hours |
Working temperature |
0-40 oC |
Working moisture |
5%-90% |
Dimensions |
170mm×70mm×52mm |
Weight: |
Optical Power Meter ( Optional)
Measurement range: -70~+10dBm or -50~+26dBm
Wavelength 850nm 1300nm 1310nm 1490nm 1550nm 1625nm
Visual Fault Locator (Optional)
​
Output Power 10mw
Wavelength 650nm ± 20nm
Tone Tracker (Optional)
Output Power 10mw
Wavelength 650nm ± 20nm
TDR Function (Optional)-Auto Test the cable fault distance (Cable Break/ Cable Mix)
Test Range
Reviews
There are no reviews yet.