Note: This Product is Not Sold With CNC. If you Need to Purchase CNC Display Separately, Please Contact Customer Service.
Drilling and Milling Machine
Specifications:
Voltage: 220V/50Hz
Power: 550W
Speed: 20-2250rpm
X by stroke: 250mm
Y-axis travel: 100mm
Z axis travel: 200mm
Extended workbench: 500*140mm
Tilt range: 45°
Grip shank diameter: 13mm
Drilling capacity: 13mm
Maximum milling diameter: 13mm
Maximum face milling diameter: 30mm
Chuck and table distance range: 180mm
Spindle hole Mohs taper: MT3
Countertop T-slot width: 10mm
Net weight / gross weight: 65/75KG
Packing: 640*560*760
Three-axis digital magnetic grid
X, Y, Z three-axis display, the accuracy is more accurate.
A magnet is attached to the panel to attach any iron panel.
Not included in the product. Need to purchase separately.
If necessary, please contact customer service to buy!
Oil pan with cabinet
Work cabinet with oil pan. Not included in the product.
Need to be purchased separately. If you need, please contact customer service to buy
Special attachment If necessary, please contact customer service to buy!
Milling jacket (set of 8)
Uses: Install milling cutter clamping sleeve
Pressing plate (58 sets)
Uses: press clamp irregular workpiece
Pliers (American 4 inch)
Uses: Clamping and drilling workpieces
Precision self-tightening chuck (1m-13mm)
Uses: clamping bit
Our Brand Story
Woodworking machinery safety knowledge
** Woodworking machinery and equipment are dangerous mechanical equipment, which is easy to cause injury.
(1) There are four main reasons for the occurrence of woodworking machinery accidents:
1. The working shaft of the woodworking machine has a high rotational speed and a large rotational inertia, which makes it difficult to brake. In order to stop the motor as soon as possible after the motor stops, the operator is often used to braking with a hand or a wooden stick, often causing injury due to inadvertent contact between the hand and the rotating tool.
2. Woodworking machinery mostly uses manual feeding, which is the reason for the latent injury. When the hand pushes the wood into the feeding, due to thrift, bending or other defects, the hand and the cutting edge are unconsciously in contact and cause injury.
3. The woodworking machinery has a high rotation speed, and the uneven wood is processed. The noise is large during the cutting process, the vibration is large, the labor intensity of the workers is large, and fatigue is easy. These factors are all easy to cause the operator to make mistakes and cause damage.
4. The operator is not familiar with the performance and safe operation technology of woodworking machinery, or does not operate according to the safety operation rules. In addition, the woodworking machinery equipment does not have safety guards installed or the safety guards fail, which is very likely to cause injury accidents.
(2) The main measures for preventing woodworking machinery accidents are as follows:
1. All kinds of woodworking machinery and equipment should be equipped with effective braking devices, safety protection devices and dust collecting and chip removal devices.
2. During the use of woodworking machinery, it must be ensured that no harmful vibrations will be generated when using any tool at any cutting speed to avoid danger during operation.
Logistics transportation
Reviews
There are no reviews yet.