The DC type structure is that the propeller can not be seen in flight, and the field of vision is wider,; The X-shaped structure is that the paddle is slightly seen in flight, but it is more suitable for flower flying. Please place the order according to your own needs!
In addition, if you have the receiver, pls just choose the drone without receiver, when you receive the drone, you can weld the receiver by yourself, it is really easy
The Secret Of Ultimate Performance Is Passion
That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.
Lightweight Side Panels – Keep Your Rig Clean
Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack Well… These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.
Secured Integrated XT60 Battery Plug – As Safe, It Can Be
Dangling battery plugs will ALWAYS find a way in your props, there’s always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.
High-Performance Electronics – F7 45A Power Stack
Our SucceX Mini F7 flight control, modern USB type-C plug, 16MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new SucceX Mini 45A ESC packed with high performance Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise besides a pre-installed capacitor on the battery lead.
XING-E Pro Performance Motors
Aluminum unibell, 5mm steel alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency.
Illumination – Let It Be Green
360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night’s race.
SucceX Force 600mW – Analog Reliable Power
Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn’t hop off in wild crashes.
Specifications:
– Total Dimensions: 166*139mm (body dimension)
– Geometry: Squashed-X or DC (DeadCat) frame available
– Bottom to top distance: 28mm
– Arm Thickness: 6mm
– Bottom plate thickness: 2.5mm
– Top plate thickness: 2mm
– Upper(middle) plate thickness: 3mm
– FC // SucceX- E Mini F7 (Link)
– ESC // SucceX Mini 45A BLHeli32 (Link)
– XING-E Pro 2207 4S/6S (Link)
– Nazgul F5 propellers
– Weight: 392.6g (without battery and GoPro mount)
FC // SucceX-E Mini F7
– MCU: STM32F22RET6 216 MHz
– Gyro: MPU6000
– Baro: DSP310
– OSD: IFLIGHT OSD (AT7456E)
– BEC: 5V 2.5A
– BlackBox: 16MB
– Uart: 4*UART(UART1、UART2、UART4、UART5)
– UART1 for VTX HD/Analog Telemetry
– UART2 for Receiver
– UART4 for GPS
– UART5 for ESC Telemetry
– 4×Dshot/PWM outputs
– Smartaudio & IRC Tramp VTX protocol supported
– WS2812 led Strip: Yes
– Bepper: Yes
– Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
– Outer Size: 27*27mm / 20*20mm φ3 mounting
– Weight: 4.9g
ESC // SucceX-E Mini 45A
– Input: 2-6s LiPoly
– Constant: 45 Amps (per channel)
– Burst: 55 Amps (per channel)
– BEC: No
– BlHeli32 telemetry: Yes
– Dimensions: 31×29.5mm
– Mounting Holes: 20*20mm φ3mm with Grommets φ2mm
– Weight: 6.7g (without motor wires)
– Target: iFlight-G071-4IN1
VTX // 5.8GHz SucceX Mini Force 600mW VTX
– Power: PIT/25/200/400mW/600mW
– Antenna Interface: MMCX
– VTX protocol: IRC Tramp
– Output: 40 channels
Package included:
– 1 x Nazgul Evoque F5 Analog (Squashed X or DeadCat Pattern)
– 4 x Nazgul F5 Props
– 2 sets of Battery pads
– 4 x Battery straps
– 1 Screw bag
Nazgul Evoque F5X/ F5D
GoPro batteries and other devices are only for display.Please purchase sepafately if necessary
All inclusive side plate design
Cool LED
Fixed power plug base
Wide x type / DC type optional
All inclusive side plate
The side plate design makes the overall appearance highly finished
It also plays a good role in protecting electronic equipment
Aurora EVOQUE
Streamlined LED lighting design makes night flight more cool
Integrated antenna base and power plug
The fixed power plug (XT60) is stable and convenient
Quick release boom
6mm high-strength machine arm, well-designed, convenient disassembly and assembly
Wide X type / DC type optional
It is more suitable for freestyle wide X-type and DC type with better field of vision
Nazgul F5X X-type
Nazgul F5D DC-type
Receiver Position design, more convenient replacement
Double cable ties for firmer battery installation
Reserved plate hole position,more convenient for frequency adjustment
Powerful electrical equipment system and professional parameter adjustment
Nazgul F5X Technical Parameters
Model: Nazgul F5X
Wheelbase: 225±2mm
Frame size: 145*172mm
Framework: Squashed X
Empty weight: 391±5g
Motor circlip hole position: 6mm
Internal space height: 22- 31mm
Motor mounting hole position: 16*16mm
Nazgul F5D Technical Parameters
Model: Nozgul F5D
Wheelbase: 22±32mm
Frame size: 136*190mm
Framework: Squashed X
Empty weight: 392±5g
Motor circlip hole position: 6mm
Internal space height: 22-31mm
Motor mounting hole position: 16*16mm
Reviews
There are no reviews yet.