Packing list
1PCS F2100B Controller
Module Function
1.Supporting 2 axes cutting tube machine with chuck mode
2.Supporting tube and plate all-in-one (chuck mode) cutting machine
3.Supporting tube and plate all-in-one (friction disk mode) cutting machine
4.Tube /Plate function auto switch
5.Tube part processing with arbitrary tube’s diameter.
6.Tube part telos cutting off function, can arbitrarily set inclined cutting angle
7.Tube with equal radius process function(V-shaped saddle)
8.Tube part telos slotting function, can arbitrarily set slotting size and angle
9..Mitre elbow cutting, can set pitch number, angle of bend
10.Saddle cutting, can arbitrarily set inclined angle
11.Eccentric saddle cutting
12.Main tube trepanning cutting, can mate with riding-type or plug-in branch pipe
13.Arbitrary shape trepanning cutting, can design profile hole by CAD
14.Multiple saddle branch pipe cutting
15.Kerf compensatory function
16.Full-automatic nesting function
Technical indicators:
1)Number of control axes:
2)2-axis linkage (customizable three-axis or four-axis) 2) Control accuracy: ±0.001mm
3) Coordinate range: ± 99999.99mm
4) Maximum pulse frequency: 200KHz; maximum operating speed: 15 meters / minute
5) Maximum number of program lines: 80,000 lines
6) Maximum single program: 4M
7) Time class resolution: 10ms
8) System working power: DC +24V DC power input, power is greater than 80W.
9) System working environment: temperature -10 ° C to +60 ° C; relative humidity 0-95% without condensation
10) Drive arc voltage increase motor maximum power: 45W (Note: only with T system). If you need more work Rate, optional up to 200W.
Main Interface
After use tube/plate cutting module, controller’s main interface is different from
common version. The primary items are:
① The end of controller’s model adds a “X”, for an example: “F7500X”.
② Add the display of cutting diameter, for an example: “D:160.00”. It interprets that
diameter is 160 mm.
But in the cutting plate interface, except the difference of controller model, the
other items are the same to common model. It is shown as figure 2.2:
Tube/Plate Cutting Switch
In the main interface, press 【F4】, then enter into Setups interface. It will show
【F1 Common】parameter function interface as figure 2.3.
Press down 【↑】or【↓】 to select parameter【System mode】, press down 【←】
or【→】to switch between two modes:【Tube cutting】and【Plate cutting]
Note: after switch system mode, the user needs to save parameters and power off
to restart system, then switches between tube cutting and plate cutting mode.
Chuck Pulse Number
Chapter 3 Tube/plate All-in-one System controller Topology Schematic
As the above figure shows, the signal of X Axis is used for controlling cart’s motor; the signal of Y Axis is used for controlling chuck’s or trolley’s motor.
At the same time, only one of the chuck’s and trolley’s motor is always enable(Using the tube/plate switch signal by the system outputs).
【Cutting Tube Mode】This port keeps open all the time in the mode of cutting tube,
keeps closed in the mode of cutting plate. Using this signal, you can switch between trolley and chuck enable.
Contact Us
If you have any questions, please contact us freely, thank you!
Payment
We accept paypal ,Escrow, Credit Card,T/T,Western Union,WebMoney Qiwi wallet and Brazil Boleto. We send goods within 1-5business days after receiving the payment. Orders will be canceled if payment is not received within 10 days of purchase
Returns
– If you receive a wrong or defective item please email us within 7 days from the date you receive the product.
– Later than 7 days the item cannot be accepted for returning.
– If the order is defective,we will send replacement parts to you after receiving the proof of the defective photos of the items that you received, and no additional charge. Shipping and handling are not refundable.
– All returns must include all original items undamaged, in re-saleable condition, all packaging including manuals, warranty forms,etc.
Shipping
– Please be sure that the address you give is correct.If the address is incorrect, the parcel fail to delivery and is sent back to the seller ,the buyer should pay for the first and returning shipping fees.
Reviews
There are no reviews yet.