Precautions:
1.
Need to turn on the spindle speed?
Never, never, never.
Don’t laugh, there are such users.
2.
How to distinguish the three wires?
The red wire is VCC, the black wire is GND, and the white wire is IO.
3.
Why is the concentricity different every time the probe is installed?
Because your ER chuck spring clip cannot guarantee 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again. So your chuck is best to buy AAA and above accuracy (concentricity
4.
Why am I obviously an AAA chuck, and the concentricity is still poor?
That’s because you bought a virtual label chuck.
Under normal circumstances, if the spindle jumps by 0.01, the AAA chuck clamps the milling cutter and the table tool holder, the error may not exceed 0.02, and the error may not exceed 0.03 at most. There will be a slight angular deviation between the center axis of the collet chuck and the center axis of the spindle, which will be magnified by the length of your tool holder. Usually you use a calibration meter to measure the root of a milling cutter, and you can’t see a big error, but because the stylus of the probe is about 50mm away from the tool holder, the error will be further magnified. Therefore, be sure to choose genuine high-precision chucks, which is nothing more than a price difference of tens of dollars.
The DIYO three-coordinate probe can realize quick centering, edge finding, center finding, shape measurement and other functions by connecting the CNC to the knife edge, which greatly solves the trouble of positioning the workpiece during the second clamping during the machining process.
The shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design.
Adapt to various control panels such as grbl control panel and Mach3
The repeated positioning accuracy of the probe is less than 0.01mm.
Reviews
There are no reviews yet.