Feature:
Feature of Spindle Motor |
|
Brand |
twowin |
Power |
3KW |
Size |
80mm |
Voltage |
220 or 380V |
Current |
10A |
Runout Off |
0.003-0.005mm |
Diameter(mm) |
105 |
Collet |
ER20 |
Clip Knifediameter |
Clip knifediameter:3mm,3.175mm,4mm,6mm,10mm |
4 Bearing :P4 grade,2X7005C P4 DT and 2X7003C P4 |
Notice : if you order the voltage is 220 V , the input and the output are all 220 V . if you order the voltage is 380V , the input and the output are all 380 V
Structural features :
–High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
–Spindle speed according to different uses can be high-speed grease and oil mist lubrication two ways.
–Spindle speed rotation temperature rise caused by the use of coolant circulation system eliminated.
Care and maintenance :
–Spindle frequency power supply connected rated voltage, frequency should be consistent with the technical parameters of the electro-spindle, spindle speed can be adjusted to change the frequency, and voltage is proportional to the change.
–Spindle being not used, the application of compressed air to blow the pipes static coolant. To prevent rust, clogging water holes. Spindle appearance should be oiled. Plus the shaft protection device, put in a dry place.
–To replace the spindle bearings, certain professional and technical personnel should be replaced. Supporting special tools, bearings should be replaced fully cleaned without removing the stator coils.
Package : 1 piece of Air cooled spindle motor
Reviews
There are no reviews yet.