This product we set up inventory in Russia, Canada, Ukraine, Czech Republic ,Spain,Belgium. When you buy it, we will ship from your country that you don’t need to consider customs clearance and duties and it will be fast delivery.
However,the zip code in Spain that starts with 35, 38, 51, 52 need to provide buyer identity information, sales vouchers, and add 15 euros for customs clearance and duties.
The zip code in Russia that starts with 6,the delivery time is long ,maybe 30-45 days and some zip codes will only be sent to the post office instead of the shipping address,you need to go to the post office to pick up the parcel.
Some areas of Canada are remote areas and need to add remote fees. When you need to add remote fees, we will send you an email. Please check the mail, thank you!
How to Connect the Solar Kit?
1. Install the solar controller in the area you need. It is recommended that the controller be installed indoors in a cool area to extend the service life.
2. First connect the controller to the battery or mobile power supply by wire (note that the controller must first connect the battery or mobile power).
3. Install the solar panel in a sunny area, do not install in the shade of the trees or have other obstructed areas.
4. Connect the installed solar panel to the controller
5. Follow the instructions of the controller, set the parameters according to your needs, or use the default parameters.
40 watt foldable solar
Specification Power:
40W Working voltage: 18V
Open circuit voltage: 21.6V
Maximum working current: 2.22A
short circuit current: 2.44A
Working temperature: -20 ℃ ~ + 60 ℃;
Folding size: 410X340X10mm
Expand Size:680X410X4mm
Weight : 1.1kg
USB output : 5V/2A USB
DC output:18V DC5521
Packing list:
1*40w Foldable Solar Panel
1*1.3meters Cigarette lighter with DC cable
1* 0.5m DC cable
10*DC adapter
1*1.3meters DC cable with alligator clip
60 watt foldable solar
Power: 60W
Working voltage: 18V
Open-circuit voltage: 21.6V
Maximum working current: 4.44A
Short circuit current: 4.88A
Working temperature: -20 ℃ ~ + 60 ℃
Foldable Size:410X340X15mm
Expand Size:1035X410X3mm
Weight : 2.1kg
100 watt foldable solar
Specifications:
1. 100w Solar Panel
Maximum Power: 100w
Optimum Operating Voltage (Vmp): 20V
Optimum Operating Current (Imp): 5A
Open-Circuit voltage (Voc): 24V
Short-Circuit Current (Isc): 5.5A
Efficiency: 19.8%
Fold Size: 660X445X10mm, Expension Size: 890X660X3mm
Weight: 2.5kg
Operating temperature: -20℃ ~ + 60℃
STC(Standard Testing Condition):Irradiance 1000w/m2 Temperature 25℃ AM=1.5
Package Listing:
1. 1 x 100w foldable solar panel
2. 1 x 10A solar controller with 0.2 m wire and 1.5 m wire
3. 0.2m 2.5mm2 alligator clip cable
4. 0.2m 2.5mm2 PV cable
200 watt foldable solar
Specifications:
1. Solar Panel Charger
Maximum Power: 200w
Optimum Operating Voltage (Vmp): 20V
Optimum Operating Current (Imp): 10A
Open-Circuit voltage (Voc): 24V
Short-Circuit Current (Isc): 12A
Efficiency: 19.8%
Fold Size: 660X445X20mm, Expension Size: 1795X660X3mm
Weight: 5.15kg
Operating temperature: -20℃ ~ + 60℃
STC(Standard Testing Condition): Irradiance 1000w/m2 Temperature 25℃ AM=1.5
Package Listing:
1. 1 x 200w foldable solar panel
2. 1 x 20A solar controller with 0.2 m wire and 1.5 m wire
3. 0.2m 2.5mm2 alligator clip cable
4. 0.2m 2.5mm2 PV cable
120 watt foldable solar
1. Material: Monocrystalline silicon cell;
2. Working voltage: 18V
Open circuit voltage: 21.6V
3. Power: 120W;
4. Maximum working current:6.66A
Short circuit current: 7.33A
5. Working temperature: -20 ℃ ~ + 60 ℃;
6. size: fold: 757X505X10mm
unfold:1015X757X4mm;
7. Weight : 3380g;
8. Belt stitching pocket with 0.5M SAE connector cable;
Package list
1* 120w foldable solar panel
1* 12v/24v 10A controller
1* 0.5 meter SAE cable
1*1* 3 meter alligator clips (13AWG)
150 Watt foldable solar
1. Material: Monocrystalline silicon cell;
2. Working voltage: 18V
Open circuit voltage: 21.6V
3. Power: 150W;
4. Maximum working current:7.9A
short circuit current: 9.1A
5. Working temperature: -20 ℃ ~ + 60 ℃;
6. size: fold: 833X505X10mm
unfold:1015X833X4mm;
7. Weight : 3660g;
8. Belt stitching pocket with 0.5M SAE connector cable;
Package list
1* 150w foldable solar panel
1* 12v/24v 10A controller
1* 0.5 meter SAE cable
1*1* 3 meter alligator clips (13AWG)
Controller connection instructions
a Before connecting the solar panel, please connect the controller to the battery first. Connecting the solar panel without connecting the battery may cause the controller to burn out and fail to display.
b After the controller is connected to the storage battery, connect the above-mentioned series or parallel solar panels to the controller through the transfer cable.
c Finally, connect the required DC load to the load end of the controller. If the load does not work, press the third button of the controller.
d According to the controller manual, adjust the parameters you need.
Precautions for installation of solar system
a When connecting this solar system, first connect the controller to the battery, and then connect the solar panel. Do not reverse the connection order.
b Please install the controller in a well-ventilated area such as indoors or shadows to avoid exposure of components and prevent water from entering the controller.
c The total power of the solar panel and DC load cannot be greater than the rated power of the controller (voltage × current), otherwise there may be a risk of burning the controller.
d The inverter cannot be connected to the controller, but must be connected to the battery.
e After installation, check whether all line connections are tight to avoid the danger of heat accumulation due to virtual connection.
f The positive and negative poles of the solar panel in the same series connection cannot be short-circuited to prevent damage to the solar panel.
g The positive and negative poles of the controller and battery should be checked clearly. Do not connect the positive and negative poles in reverse
How to use rechargeable batteries:
① First connect the controller battery terminal line with the crocodile clip line.
② Clip the red and black clips of the crocodile clip to the positive and negative terminals of the battery, respectively.
③ Connect the output line of the solar folding bag with the photovoltaic input line of the controller.
④ If there is a DC load, connect the DC load to the controller.
⑤ Place the solar folding bag in the sun, and try to make the panel face the sun as much as possible to prevent the obstruction.
⑥ Adjust the controller parameters (set the parameters according to the controller’s instructions, or set the parameters according to your own requirements, and use the default parameters).
How to charge a portable mobile power
supply:
① Connect the controller battery terminal cable to the portable power bank adapter first.
② Replace the charging head of the mobile power adapter with a matching interface.
③ Plug the replaced charging cable into the charging port of the mobile power supply.
NOTE:
When there is no sunshine, the light intensity decreases to starting point. Then the controller recognizes the starting signal after six minutes. The load will start to work according to the setting parameter. When there is sunshine, the light intensity rises to starting point, and then the controller recognizes the close signal after six minutes. The load will stop working.
Operating Instruction
Installation and operation of solar cell module
a). Climatic Conditions
Install PV module according to the following conditions
Ambient Temperature: -20℃ to + 40℃.
Operating Temperature: -20℃ to + 80℃.
Borne Snow Pressure: less than 2000Pa
Borne Wind Pressure: less than 3000Pa
Water proof: don’t soak the PV module in water or continuously expose it to the sprinkling device or under fountains.
Corrosion resistance: except for corrosive salt area and sulfurous area.
Q&A
Q: About Product
A: All products are 100% genuine that will be fully tested before shipment. All photos displayed are all taken in kind by our products.
Q: Can I change the Name/ address/ Color/?
A: Please send us the right name/address/color. BUT we do not offer this service during all the big promotion. Pls double check your orders before making the payment.
Q: How can I get the package quickly?
A: Please provide the correct detaild address and phone number when placing your order. Please do not write the detailed address into two parts, for example, address 1 and address 2, the system will only default address 1.
Q: About Sign of Parcel
A: Please open the parcel in post officer’s presence, if the parcel damaged or empty(stolen), please ask the post office to provide official document and make the compliant on the spot.
Q: About Feedback
A: We regard customers as our friends. We hope you can shop from us with more happiness and less worry. Please do not forget to leave all 5-Star feedback. Then you can contact our customer service to get a surprise gift.
Reviews
There are no reviews yet.